Doremi ShowVault / IMB - Manual (Page 11)

CRT.OM.001087.DRM Page 11 Version 1.7
Doremi Labs
4 ShowVault Server Installation
4.1 ShowVault Server and Projector Installation
Follow the steps below in order to set up the ShowVault server:

Connect one end of the Ethernet cable into the ShowVault "Eth0" socket and the other
end into the Barco projector (Figure 8).
Figure 8: Ethernet Cable Connection

Connect one end of the PCI-Express cable into the ShowVault and the other end into the
IMB board on the Barco projector (Figure 9).
Figure 9: PCI-Express Cable Connection