Doremi ShowVault / IMB - Manual (Page 13)

CRT.OM.001087.DRM Page 13 Version 1.7
Doremi Labs
4.2 Audio and GPIO Installation
4.2.1 Audio shielded CAT5 Cable Installation

Plug one shielded CAT5 cable end into the top AES slot (RJ-45 connector) for audio
channels 1-8.

Plug the other end of the shielded CAT5 cable in the audio processor.

Take another shielded CAT5 cable end and plug it into the bottom AES slot (RJ-45
connector) for audio channels 9-16.

Plug the other end of the shielded CAT5 cable adapter in the audio processor.
4.2.2 GPIO shielded CAT5 Cable Installation

Plug one shielded CAT5 cable end from the GPI slot into whichever automation
controller is available or required.

Take another shielded CAT5 cable and plug it from the GPO slot into whichever
automation controller is available or required.
4.2.3 Audio and GPIO Pin-Out Information
Figure 12: RJ45 Socket Pinout Example