Doremi ShowVault / IMB - Manual (Page 9)

CRT.OM.001087.DRM Page 9 Version 1.7
Doremi Labs
3 IMB Board Installation Procedure

The IMB board is illustrated below:
Figure 5: IMB Board With Barco Mounting Bracket
3.1.1 HD-SDI Input

Dual HD-SDI input compliant with SMPTE 292M and SMPTE 372M.

HD-SDI input capable of supporting 3 GHz signals per SMPTE 424M. Mapping per
SMPTE 425M is not implemented yet, but it will be available via a software update.

The following are 2D formats that are currently supported on the HDSDI input of the
IMB:
Format\fps 23.98 24 25 29.97 30 47.95 48 50 59.94 60
720p X X
1080i X X X X X
1080p X X X X X
3.1.2 HD-SDI Output

IMB Revision A: HD-SDI output is not available.

IMB Revision E: Dual HD-SDI output compliant with SMPTE 292M and SMPTE 372M.
HD-SDI output capable of supporting 3 GHz signals per SMPTE 424M.
Note: With the current firmware, the HD-SDI Output is not used.
3.1.3 HDMI Input

The IMB incorporates High-Definition Multimedia Interface technology. HDMI®, HDCP
compatible input, supporting deep color video up to 12-bit with the following formats: