Doremi GHX-10 - Manual (Page 20)

4.2 Remote Controller Functions
Remote Control Function
Input format selection Select HD-SDI, SDI, HDMI/DVI (through the DVI-
D/HDMI button) or Pattern
Note: The DVI-A button is not used.
“IR Lock” button Not used
“RESET” button Not used
“Menu” button Invoke the Menu System. Pressing this button on the IR
is similar to pressing the scroll button on the GHX-10
front panel
“Exit” button Back one menu level. Similar to Front Panel ESC
button
Output format area Set the SDI or HDMI/DVI output resolution to:
HDMI/DVI: Auto, 720p, 1080i, 1080p, 1024x768,
1280x768, 1366x768, 1280x1024, 1920x1200
SDI: 480i, 576i, 720p, 1080i, 1080p
“Up Arrow” button Not used
“Down Arrow” button Not used
“Left Arrow” button Navigate left. Similar to Wheel counter clockwise
“Right Arrow” button Navigate right. Similar to Wheel clockwise
“Select” button Ok/Select, Similar to Select on Front Panel
“InRes” buttons Force the output resolution to match the input
resolution. There is one for SDI and one for HDMI/DVI
“InFPS” buttons Force the output frame rate to match the input frame
rate. There is one for SDI and one for HDMI/DVI
“Scaling” button Navigate between the available scaling options
“De-Int Filter” button Toggle De-interlacing Filter ON or OFF
“Status OSD” button Toggle on screen display ON and OFF
“Save” button Save settings
OUT-HDM Set the output interface to HDMI/DVI
OUT-SDI Set the output interface to SDI
GHX.OM.000510.DRM Page 20 Version 2.2
Doremi Labs