Care and maintenance, Uninstalling the usb drivers – NeoPro Borrego+ 8x8 User Manual
Page 33
33
DOC42-00027-B Integrator's Guide.doc
Uninstalling the USB drivers
There is typically no harm in leaving the drivers installed in Windows. It is
usually best to keep them installed, so that when the device is plugged back in, it
will be recognized automatically and is assigned the same COM port number.
However, if you need to uninstall the drivers for any reason, use the Windows
Control panel to do so.
To Uninstall:
Click the Start Menu
Select Settings, then Control Panel
Click Add or Remove Programs
Find Matrix Switch USB Drivers
Click Change /Remove
Follow the on screen instructions.
Care and Maintenance
The NeoPro matrix switch does not require any regular maintenance besides
keeping it clean.
Never use harsh cleaners or solvents on the front panel. There are several
dusting products for electronics, and standard glass cleaner may be used.
Spray any liquids onto a towel first, then wipe the front panel with the moist
towel.
Should the NeoPro matrix switch fail to operate as expected, please contact
NeoPro for service advice. THERE ARE NO ADJUSTMENTS OR USER
SERVICEABLE PARTS INSIDE THE CABINET.