NeoPro Borrego+ 8x8 - Manual (Page 5)

5
DOC42-00027-B Integrator's Guide.doc
Introduction
Congratulations on your purchase of the NeoPro audio/video matrix switch. The
NeoPro family of matrix switches features component video and both analog
and digital audio signal routing with a variety of features, including:
System Control
• Serial control via RS232 or USB ports
• IR control via front panel sensor or “wired” (back panel)
• Independent routing of all signal types
• 16 memory locations to store switch configurations and
volume/bass/treble levels
• IR discrete code control for volume up, down, and mute for all outputs.
Two-code discrete IR command for switching
Audio Controls (for models with Analog Audio)
• Volume, Bass, and Treble levels
• Variable duration volume fade up/down
• Volume muting
High Definition Video (for models with Component Video/YPbPr)
• Component video (YPbPr) section bandwidth is 140 MHz for 1080p
Digital Audio
• Digital audio via SPDIF can also be used for standard video (480p)
signals through COAX
• Models that have TOSLINK inputs and outputs are switched together
with SPDIF
Pass-through Outputs
• The pass-through connections are high bandwidth buffered copies of all
the input signals, before the matrix switch
• These pass-through can be used to connect to an additional matrix,
adding another 8 outputs
• Up to 12 switches can be stacked to create a full non-blocking 12x96
matrix
All models have an attractive enclosure with brushed aluminum and high gloss
acrylic front, and a black top cover. Connectors are gold plated for maximum
signal quality and resistance to corrosion.