TabletKiosk eo TufTab a7230X - Manual (Page 19)

4 Chapter 01: Getting Started
NOTE: When you first connect the tablet into an external power
source, the battery charge indicators will begin to glow orange. When
each battery is fully charged its indicator will turn green. See the
section entitled Battery Care for tips on maximizing battery life and
performance.
Step 3: Connecting Applicable Peripherals and Networking Cables
If you would like to use any external peripheral with your UMPC
(i.e. USB mouse, USB keyboard, etc.) or are planning to connect
to the Internet and/or a corporate LAN using a wired connection
(RJ45) as opposed to wirelessly, connect the external peripheral
now. See the chapter entitled Touring Your eo TufTab Ultra-
Mobile PC, to identify which ports to use.
IMPORTANT: When you power on the a7230XT for the first time,
you will need to have an external USB keyboard connected in order
to complete the Windows XP Professional installation routine. The
a7230XD can use the on-screen keyboard in Active Digitizer mode.
Step 4: Powering on the eo TufTab Ultra-Mobile PC
Locate the four function buttons on the front face of the
eo TufTab to the right of the LCD screen. The
button is
the computer’s main power toggle. Press and hold it for
approximately four (4) seconds until the green power indicator
on the front face above the LCD screen lights up. The eo TufTab
should now boot up.
Locate the power port on the left side
of the eo TufTab and insert the AC
Adapter power tip.
Plug the power cord into the AC
adapter and then plug the three
pronged plug into a power outlet.