TabletKiosk eo TufTab a7230X - Manual (Page 72)

Chapter 04: Using Your eo TufTab a7230X with Windows XP 57
you will probably find that you are now connected to the
Internet. If not, continue on with step 2.
2. From the START menu,
select “Connect To”
and tap on “Show all
connections”.
3. In the “Network Connections” window, look at the “Local
Area Connection” item and make sure it reads as “Connect-
ed”. If not, recheck that your networking cable is properly
connected, or contact your network administrator.
4. Press and hold the “Local Area Connection” item and select
“Properties” from the pop-up menu that appears, or if the
Status window appears, tap the “Properties” button.
5. Under the General Tab, you’ll
see a list box called “This
connection uses the follow-
ing items:”. Select “Internet
Protocol (TCP/IP)”, and tap
the “Properties” button to
open the “Internet Protocol
(TCP/IP) Properties” window.
6. If DHCP is used on your
network, tap “Obtain an IP
address automatically” and
“Obtain DNS server address
automatically”. Otherwise,
enter the correct IP and DNS
server addresses by selecting
the two options that begin
with “Use the following…” If
you are unsure of which
option to use, contact your
network administrator or
your ISP’s Tech Support.