TabletKiosk eo TufTab a7230X - Manual (Page 62)

Chapter 04: Using Your eo TufTab a7230X with Windows XP 47
Programming the Function Buttons
Your eo TufTab a7230X has four function buttons located on the
right side of the LCD panel on the front face of the tablet. The
first two buttons are assigned functions (System Power and SAS
respectively) that can not be overridden. Therefore, only buttons
three and four are user-programmable.
You can use the “Tablet Button” applet to reprogram those
two buttons to activate a different pre-programmed task, or to
launch an application or a batch file of your choosing.
To program a function button:
1. Tap on the icon
in the System Tray
to open the “Tablet
Button” panel. It
will give you an
overview of the
functions mapped
to each of the
buttons. By default,
Screen Brightness is
assigned to the two
buttons.
2. To change an action
performed by a
function button, tap
one of the icons under
the button you wish to
program to assign one
of the default actions.
To assign a custom
function, first tap the
icon and then tap
on the “Open” button
to navigate to an application (COM or EXE) or batch file you
would like to have the button launch when pressed.
The actions available to function button three
(HotKey 1) are, in order, Volume Up, Screen Bright-
ness Increase, WiFi On/Off, and Custom Action.
The actions available to function button four
(HotKey 2) are, in order, Volume Down, Screen
Brightness Decrease, Bluetooth On/Off, Activate
Barcode Reader, and Custom Action.