TabletKiosk eo TufTab a7230X - Manual (Page 23)

8 Chapter 01: Getting Started
Attaching the Stylus with the Tether
Your eo TufTab comes with a stylus pen and a tether you can use
to secure the stylus to the system so that you do not drop and/
or lose it.
1. Slip an end loop on the tether, it doesn’t matter which one,
through the hole in the stylus at the top of the clip.
2. Pull the loop all the way through the hole.
3. Slip the other end of the tether through the loop.
4. Pull it tight.
5. Slip the other end of the tether through the tether port on
the left side of the eo TufTab.
6. Pull the loop all the way through the hole.
7. Slip the stylus pen through the loop.
8. Pull the tether all the way through the loop.
9. The stylus pen can be slipped into the stylus garage in the
carrying handle.
!
@
$
#