Televes HD DTT STB TV on demand access ZAS Hbb - Manual (Page 19)

19
EN
8.2 Timeshifting banner
The timeshifting banner is displayed each time you use trick
modes, or when you press INFO key during timeshifting.
Note: Pressing INFO key when the banner is already displayed
has no effect as detailed programme information is not
available during timeshifting.
The timeshifting banner contains the following
information:
An icon on the channel logo indicating the operation in
progress (pause, play, forward, rewind) and the image
speed.
A timeline indicating the filling level of the timeshifting
buffer.
A cursor indicating the position of the live in the
timeshifting buffer.
A cursor indicating the current reading position and the
delay compared to the live.
As with the LiveTV banner, to close the timeshifting banner:
Wait for a few seconds, the banner closes automatically
(same duration as the LiveTV banner, see “Banner display
duration” section)
Press EXIT key.
Press arrow key or . This closes the banner and opens
the main menu on the EPG of the current channel.
Press OPT key to display the options available for the
current programme.
Available options are the ones described in the LiveTV
banner section.
8.3 Trick modes
To continue watching the programme from the same point
where it was paused, press play key .
Note: Whatever the watching speed in progress, pressing play
key will always go back to normal speed.
To navigate the time bar to search for a particular scene:
When video is playing (at normal speed or more):
Use the key for a fast rewind. Each time you press
the key, the rewind speed increases in the following
sequence: x-1, x-2, x-4, x-8, x-16, x-32, x-MAX (x-64).
Note: You can fast rewind back to the start point. If
you reach the start point while rewinding, the
programme is automatically played at normal
speed from that point.
Use the key for a fast forward. Each time you press
the key, the speed increases in the following sequence:
x2, x4, x8, x16, x32, xMAX (x64).
When video is paused (or in slow motion mode):
- Use the key for a slow forward. Each time you press
the key, the speed increases in the following sequence:
x1/8, x1/4, x1/2, x1.
Note: When reaching normal speed (x1 or x-1), you exit the
slow motion mode.
Skip function (jump of 30 seconds) can be activated by:
- A long press on key or . In this case a unique jump
forward or backward is done.
- Using skip keys. In this case a jump is done each time
the key is pressed.
To watch the programme frame by frame, press the pause
key successively.
Note: Frame by frame function is only available when the
video is playing at a speed of x1/8, x1/4, x1/2, x1, x2 or
x4.