Tview D65TSG - Manual (Page 81)

81
Button Description
purposes.
Port
The communication port used between the GPS receiver and
the application.
Baud Rate The communication speed used between the GPS receiver and
the application.
Autodetect Tap this button and let Nav N Go iGO 8 find and connect the
GPS receiver.
4.5.8 TMC settings
You can set up the connection to the TMC receiver. If the TMC receiver is working, you can
select the radio station to be received. Tap the following buttons: , ,
.
If there is no TMC receiver connected to Nav N Go iGO 8, you have the following options:
Button Description
No TMC Hardware Found! The first line of the screen informs you about the connection
status of the GPS receiver.
Connecting the TMC receiver is automatic in Nav N Go iGO 8,
so normally you will not need this screen of settings at all.
Protocol
The communication protocol used between the TMC receiver
and the application.
Port
The communication port used between the TMC receiver and
the application.
Baud Rate The communication speed used between the TMC receiver and
the application.
Autodetect Tap this button and let Nav N Go iGO 8 find and connect the
TMC receiver.
With a TMC receiver already connected, the content of the screen is different:
Button Description
Use Auto-tuner If Auto-tuner is turned on, the tuner of Nav N Go iGO 8 sweeps
through the FM CCIR radio band searching for a TMC signal.
The first station with TMC data will be used automatically. When
no TMC signal is available, the tuner keeps on searching. Turn
off Auto-tuner to select a radio station manually.
,
When Auto-tuner is turned off, search for the desired radio
station manually with these buttons.
Exclude This Station
Push this button to put the currently received FM radio station on
an exception list, and make Nav N Go iGO 8 search for another
station instead.
Show Excluded Stations This button opens the list of radio stations previously excluded.