Xtramus DApps-MPT V1.4 - Manual (Page 32)

32
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
5.3. Performance Tasks in Layer 3 (PT3)
A. Network Tool: Ping
Ping is a network tool used to test whether a particular host is reachable across an IP network. It is also
used to self-test the network interface card of the computer, or as a speed test.
Perform Ping test on DUT in layer3 that is based on different IP addresses, subnet mask, ping IP address
and gateway.
 PT3-Ping
B. Unicast Test
Unicast transmission is the sending of information packets to a single destination. In layer 3 test, unique
IP address is the key of single destination as illustration below.
Perform unicast test on DUT in layer 3 with different speeds, mode and various configurations.
 PT3-UC-10H,

PT3-UC-10F,

PT3-UC-100H,

PT3-UC-100F,
 PT3-UC-1G.