Xtramus DApps-MPT V1.4 - Manual (Page 385)

385
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
 Excess Tolerance(pkts): You can set the value of tolerance for excessive packets.
 Enable Flow Control: enable this option to allow the flow control function.
 WAN Port First Obtain IP: enable this option to allow the system to provide first an IP to the
selected WAN port.
B. Test Procedure
 Force Link Down: Enabling this function will allow you to set the time to force link down.
 Link Wait (Minimum): The minimum waiting time for link up.
 Link Wait (Time Out): The maximum waiting time for link up.
 WAN Media Type: Scroll down to choose the media type for WAN port in auto negotiation mode.
 LAN Media Type: Scroll down to choose the media type for LAN port in auto negotiation mode.
 WAN to LAN Utilization (%): The transfer rate from WAN port to LAN port.
 LAN to WAN Utilization (%): The transfer rate from LAN port to WAN port.