Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 32)

Functions of port-pairing configuration window:
A. Create Test Pair: You can select each Test Pair 1 for changing theirs settings here. You can also
create new Test Pair window by clicking the + button.
B. Choose your source port: Scroll down the IGMP Source Port Available field to select the port as
source port. Please note that each port is displayed as (chassis number, module cards’ slot, port
number) – XM-RM modules type. The selected port will be displayed on the Selected field to the
right.
C. Choose your host port: Select the port to be added on the group from the left side IGMP Host Port
Available and click on the > button to move the selected port(s) to the right side Selected field. You
can return the port(s) from Selected field to IGMP Host Port Available by selecting the port and click
the < button. If you click the << button, than all the ports from the Selected field will return to the IGMP
Host Port Available field.
D. Set your group: Type your initial group address on the left side address field.
E. Apply the settings: If you are finished with the settings above, please click the Set button to apply the
settings or Reset to restart with the settings.
32
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®