Xtramus NuApps-IGMP-RM V1.2 - Manual (Page 38)

Available Port Information
Module Name
The name of the current module card under this test mode. It is based on
(chassis number, module card’ slot, port number).
MAC address The MAC address of the current module card’s ports.
VLAN enable You can choose to Enable or Disable the VLAN function.
VLAN ID If you enable the VLAN function, you will be able to set the VLAN ID here.
CFI Enable or Disable the Canonical Format Indicator (CFI) function.
VLAN Priority
If you enable the VLAN function, you will be able to set the VLAN Priority here,
in which the range is between 0-7.
IP Address Set the IP address for the current port.
Gateway IP Set the IP of your Gateway.
Mask Set the Subnet Mask here.
Current
LinkStatus
Shows the current link status in speed/duplex/autonegotiation.
Media Speed Set the media speed of your module card.
Duplex Set the Duplex for Full or Half.
Autonegotiation
Set the as Auto negotiate or Force the system to run task on the set media
speed.
Group IP Shows the IP address of the group under test.
Number of Group Shows the number of group under test.
Setting Categories
All Shows all the available port information.
Basic
Shows only Current Link Status, Media Speed, Duplex and Autonegotiation
information.
Protocol
Shows only Protocol, MAC address, VLAN enable, VLAN ID and CFI
information.
IGMP Setting Shows only Group IP and Number of Group information.
38
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®