AMETEK XBT Series - Manual (Page 14)

Introduction
1-2 M370187-01 Rev J
• memory to store 100 configurations for recall
• built-in timer (1sec – 100 hrs) to disable power
• over voltage protection (OVP)
• over current protection (OCP)
• key lock
• load and line regulation within .01%
• remote control mode with less than 50 ms transient time
• USB and RS232 control standard
• GPIB optional interface
• Ethernet/LAN connectivity, 10/100 base-T compatible
• 16-bit programming and 16-bit readback of voltage and current
• SCPI compliant command set
Minimum System Requirements for Ethernet Option
PC Connection
• Pentium-based laptop or desktop computer running Microsoft Windows XP
• Ethernet-based Network Interface Card (NIC) or built-in port capable of
10/100 Mbit operation
• Standard CAT 5 cable Ethernet interconnect cable
• Microsoft Internet Explorer version 6.0 or later
LAN Connection
• Pentium-based laptop or desktop computer running Microsoft Windows XP
• Ethernet-based Network Interface Card (NIC) or built-in port capable of
10/100 Mbit operation
• Switch or hub (Linksys brand strongly recommended) for LAN connection
• Standard CAT 5 cable Ethernet interconnect cable
• Microsoft Internet Explorer version 6.0 or later