Remote interface protocol and package mode, 1 introduction, 2 definition of parameters – AMETEK XBT Series User Manual
Page 35: Remote interface protocol and package mode -1, 1 introduction -1 5.2 definition of parameters -1
5.
REMOTE INTERFACE PROTOCOL
AND PACKAGE MODE
This section presents communication protocol, which includes SCPI instructions
and low-error protocol.
5.1 Introduction
SCPI compliant commands allow remote operation, control and monitoring of the
power supply by connecting to a personal computer (PC) via USB, IEEE-488.2
or RS-232 interface.
5.2 Definition of Parameters
Type Valid
arguments
<boolean> ON or 1 / OFF or 0
<NR1>
The data format <NR1> is defined in IEEE-488.2 for integers. Zero,
positive and negative integer numeric values are valid data.
<NRf>
The data format <NRf> is defined in IEEE-488.2 for flexible numeric
representation. Zero, positive and negative floating point numeric
values are valid data.
<string>
Characters are enclosed by single or double quotes.
<NL>
New line, hex code is 0x0Ah
<Rtn> Return,
hex code is 0x0Dh
<END>
end or identify
M370187-01
Rev J
5-1