Aplex Technology ACS-2120 User Manual
Page 41
ACS-2120 User Manual
41
Note: Due to limited address length of BIOS, only a portion of panel parameters are listed in
BIOS Setup. If the connected panel is not included in the parameter list, display
problem will occur. In this case, Please do not change BIOS setup
.
3.8.1 North Bridge Configuration
BIOS SETUP UTILITY
Chipset
North Bridge Chipset Configuration
Options
Auto
Max MHz
← Select Screen
↑↓ Select Item
+- Charge Field
F1 General Help
F10 Save and Exit
ESC Exit
PCI MMIO Allocation: 4Gb To 3072MB
DRAM Frequency [Auto]
Configure DRAM Timing by SPD [Enabled]
Initate Graphic Adapter [IGD]
Internal
Graphics
Mode
Select
[Enable,8MB]
PEG Port Configuration
► Video Function Configuration
V02.68 © Copyright 1985-2009 American Mega trends , Inc.
DRAM Frequency:
[Auto]
[Max MHz]
Configure DRAM Timing By SPD:
[Enabled]
[Disabled]
Initate Graphic Adapter:
Select which graphics controller to use as the primary boot device.
[IGD]
[PCI/IGD]
[PCI/PEG]
[PEG/IGD]
[PCIE/PCI]