Software installation and configuration, Table 2-3 hpi tags (continued) – Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) User Manual
Page 22
Software Installation and Configuration
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C)
22
OPENHPI_VARPATH
path to store user events
Any valid path
[/var/lib/bbs-hpib]
- If
OPENHPI_DEL_SAVE
is YES,
then user events are stored in
this path by default
/var/lib/
bbs-hpib
OPENHPI_CONNECTION_PING_INTERVAL
Connection ping interval for
the clients
<0…N>
[500]
- 500 milliseconds is the
default ping interval
1000 ms
OPENHPI_CONNECTION_PING_TIMEOUT
Connection timeout for
clients
<0…N>
[5000]
- 5000 milliseconds is
the default timeout
5000
OPENHPID_MAX_NUMBER_OF_CONNECTION
S
maximum number of HPI
clients
<0…N>
[30]
- when the client
connections reach 30, any
further connections are
rejected
30
OPENHPI_CONNECT_LOCAL_ONLY
Secure connections,
local host connection
only
“YES | NO”
[NO]
– Clients can connect
from any outside host that
is reachable
YES
– Clients can connect
only through loopback
address
NO
OPENHPI_START_SNMP
Start SNMP after HPI-B
daemon discovery
“YES | NO”
[YES]
– snmp is started
after HPI-B discovery
NO
– snmp is not started
NO
OPENHPI_SNMP_SCRIPT
SNMP script to run if
OPENHPI_START_SNMP
is
YES
<Path to snmp
script>
[/etc/init.d/hpibsnmp]
–
default snmp script to be
executed
/etc/init
.d/hpibsn
mp
OPENHPI_DAEMON_PORT
Openhpi daemon port
port number
[4743]
- default port for HPI-B
daemon
4743
OPENHPI_LOGFILE
Path and Name of the log file
Any valid
name
[/var/log/bbs-hpib]
- log
file name starts with bbs-hpib
Ex: bbs-hpib00.log
/var/log/
bbs-hpib
OPENHPI_LOGFILE_MAX
Sets the maximum number
of log files to be created
<0…N>
[3]
- By default, 3 log files are
created
2
OPENHPI_LOGFILE_MAX_SIZE
Log file maximum size
<0…N>
[500000]
- 500 KB is default
maximum size
500000
Table 2-3 HPI Tags (continued)
Tag
Description
Allowed values
Default in Config. file
Built-in
Default