Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 88)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 88
Example:
Shelf IP address = 172.16.3.0
logical slot = 14
LAN channel = 1
configurable offset = 0.0.100.0
172.16. 3. 0
+ 0. 1. 0. 0
+ 0. 0. 0.140
+ 0. 0.100. 0
---------------------------
LAN channel IP address = 172.17.103.140
Most of the other parameters used during SOL configuration can be configured in the HPI
configuration file /etc/bbs-hpib/bbs-hpibd.conf on the ATCA-MF106/SAM-1411.
Entries to the configuration file are optional. If for a parameter there is no entry in the
configuration file, a built-in default value is used. The following table gives details on all
configurable parameters:
Table 4-52 Configurable SOL Parameters
Keyword Description
Allowed
Values Default in
Config. File Built-in
Default
Sol_MgmtEnable 1: enables SOL
configuration
0: disables SOL
configuration 0, 1 1 enabled
Sol_UserId User ID used for SOL 2-4 2
Sol_UserName User name used for
SOL String of
length 1-16 soluser
name Admini
strator
Sol_Password Password used for
the SOL user String of
length 1-20 soluserpassword Admini
strator
Sol_UserPrivilegeLimit Privilege limit for the
user created for SOL CALLBACK,
USER ADMINI
STRATOR