Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 74)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 74
4.5.13 SOL Configuration Control
SOL configuration control is used to configure SOL parameters. This control can be used to
configure an IPMI user, user privileges, LAN channel parameters, and SOL parameters. hpisol
example client application makes use of this control to set/get SOL parameters. Refer to
section
Serial Over LAN Configuration on page 87 , for more information on SOL configuration.
Table 4-38 Boot Bank State
SaHpiCtrlStateT Value
Type SAHPI_CTRL_TYPE_OEM
StateUnion.Oem.MId OHHPI_MANUFACTURER_ID_MOTOROLA
StateUnion.Oem.BodyLe
ngth
2 ( max - 255 )
StateUnion.Oem.Body
For Set or Get, the body will be
Offset 0
- processor id
Offset 1
- bank id
Table 4-39 SOL Configuration RDR
SaHpiRdrT Value
RecordId
Assigned by HPI implementation
RdrType SAHPI_CTRL_RDR
Entity
Entity path of the managing FRU which owns the
control
Ex:
{ADVANCEDTCA_CHASSIS,6}{PHYSICAL_S
LOT,1}{PICMG_FRONT_BLADE,1}
RdrTypeUnion
Defined in next table
IdString MOTHPI_CTRL_NAME_SOL_CONFIG
Table 4-40 SOL Configuration Control
SaHpiCtrlRecT Value
Num MOTHPI_CTRL_NUM_SOL_CONFIG