Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 98)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 98
Example
Updating the IPMC Firmware of HPM.1 Compliant Blade via the hpifumi Example
Tool
In order to upgrade the IPMC firmware of HPM.1 compliant blade, proceed as follows.
1. Copy the new firmware image file to a directory on the blade where the hpifumi
example application runs.
2. Identify the FUMI object which represents the IPMC of the blade. This can be
achieved by entering hpifumi without any parameters. All available FUMI objects
will then be displayed in a way similar to the following example output.
resource: 65 ATCA-MF106:
{ADVANCEDTCA_CHASSIS,6}{SHELF_MANAGER_SLOT,1}{SHELF_MANAGER,1}
Fumi 0
IdString : IPMC
AccessProt : SAHPI_FUMI_PROT_LOCAL
Capability :
NumBanks : 1
Oem : 0x00100000
resource: 70 ATCA-MF106:
{ADVANCEDTCA_CHASSIS,6}{SHELF_MANAGER_SLOT,2}{SHELF_MANAGER,2}
Fumi 0
IdString : IPMC
AccessProt : SAHPI_FUMI_PROT_LOCAL
Capability :
NumBanks : 1
Oem : 0x00120000