Artesyn System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User's Guide (June 2014) - Manual (Page 66)

Using HPI-B
System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C) 66
RdrTypeUnion.SensorRec.DataFo
rmat.ReadingType
SAHPI_SENSOR_READING_TYPE
_UINT64
Although
ResourceIDs are
32 bits, we need to
use the Uint64
Sensor reading
type for this
Sensor. The least
significant 32 bits
are populated
with the
ResourceId, the
most significant
32 bits are
reserved and set
to 0.
RdrTypeUnion.SensorRec.DataFo
rmat.BaseUnits
SAHPI_SU_UNSPECIFIED
RdrTypeUnion.SensorRec.DataFo
rmat.ModifierUnits
SAHPI_SU_UNSPECIFIED
RdrTypeUnion.SensorRec.DataFo
rmat.ModifierUse
SAHPI_SMUU_NONE
RdrTypeUnion.SensorRec.DataFo
rmat.Percentage
SAHPI_FALSE
RdrTypeUnion.SensorRec.DataFo
rmat.Range.Flags
00h
No flags are set,
indicating that no
range is defined.
RdrTypeUnion.SensorRec.DataFo
rmat.Range
Not Applicable
RdrTypeUnion.SensorRec.DataFo
rmat.AccuracyFactor
0.00
RdrTypeUnion.SensorRec.Thresh
oldDefn.IsAccessible
SAHPI_FALSE
Table 4-24 Active and Stand-By HPI Daemon Sensors RDRs (continued)
SaHpiRdrT Value Notes