Avery Dennison Sierra Sport4 9493 Battery/AC Power Adapter - Manual (Page 2)

2
C h a r g i n g t h e B a t t e r y
You can charge the battery either in or outside of the
printer.
1. Connect an AC power cord into the charger.
2. Plug the power cord into a grounded electrical
outlet.
3. Plug the charger into the socket on the right side
of the battery.
The LED lights up as the battery charges. It may take
2-3 hours for the battery to fully charge.
R e a d i n g t h e L E D
The green charger LED indicates the following
activity:
LED Charge Status
1 Blink Pre-charge
2 Blinks Charging
3 Blinks Battery usable (at 80%
capacity)
Continuous blinking Error
Solid Charge complete
Battery
Socket
Charger
LED