Unpacking, Placing, Rfi grounding – Dukane Ultrasonic Hand Held System iQ Series User Manual
Page 17
Page 11
Section 3 – Installation
Dukane Manual Part No. 403-577-01
Unpacking
Carefully open your shipping container, and make sure
it contains the items shown on the shipping documents.
Inspect all items, and report any missing items or damage
immediately.
Placing
Make certain generator placement and cable routing do
not interfere with normal operation. Maintain easy access
to your equipment.
The operator should have unobstructed access to cables
and wiring.
RFI Grounding
Proper grounding for the generator chassis is essential
for the effective suppression of electrical noise or
RFI (Radio Frequency Interference). Every ultrasonic
generator contains a RFI filter that blocks noise on the
AC power line from entering the system control circuitry.
This filter also prevents ultrasonic frequency noise from
being fed back into the AC power line. For the RFI filter
to operate effectively, it is necessary to correctly ground
the system.
Connect a grounding wire from the grounding stud
connection (see Figure 3-1) to the nearest grounded metal
pipe or equivalent earth ground.
See Connecting Cables on the next page.
CAUTION
To m i n i m i z e e l e c t r i -
cal noise and eliminate
ground currents, ground
the chassis as shown.
Use a STAR configuration
(illustrated below). Do not
DAISY CHAIN the grounds.
Earth
Ground
#14 Gauge
Stranded or
Solid Wire
Fixed Probe Mount
or 2nd Chassis
Grounding Stud
3rd Chassis
Grounding
Stud
Chassis Grounding
Stud
Recommended protective
earth ground connection
wire color: green or green
with yellow stripe.
NOTE
Chassis Grounding Stud
The chassis grounding stud is used to
attach a protective earth ground to the
generator. This will aid in the suppression
of electrical interference or radio frequency
interference (RFI) that is common in a
industrial environment. Stud location
is shown in Figure 3-1 on the following
page.
CAUTION
If you have any questions
about the grounding of your
equipment and/or the electri-
cal box, contact a qualified
electrician.