Avery Dennison Monarch 9906 MonarchNet2 - Manual (Page 47)

Console Commands 4-3
H e l p C o m m a n d s
For help at any time, type “Help” and a list of available commands appears. The Help
command builds on itself, because for each command you type, more details appear for
each option.
Note:
There are help menus for all supported commands. To access a help menu for a
specific command, type HElp <command>.
Syntax: HElp set
DEFAULT Set parameters to factory defaults
EN Network Parameters
LOAd Firmware update parameters
PAssword <password> Set console password
PORt <name> Parameter for port <name>
PROtect <password> Set update password
SERVEr Server and LAT parameters
SERVIce <name> Service Parameters
SNMP SNMP Variables
Syslog Syslog Parameters
DNS DNS Parameters
STRing n "..." BOT/EOT string
IP LPD/TCP Parameters
POP3 POP3 Parameters
SMTP SMTP Parameters
NETWare Netware Parameters
POWERON <delay-sec> Power on delay
Displays a list of the available help commands for “Set.”
Syntax:
Help set ip
IP LPD/TCP Parameters
ADdress aa.bb.cc.dd IP node address
ARP [EN/DIS] IP set via ARP
BAnner [EN/DIS] LPD banner printing
CHKSUM [EN/DIS] IP receive checksum
BOot n Number of DHCP/BOOTP tries
ENable/DISable Enable or Disable IP Processing
FTIme [EN/DIS] Fast timeout
FTP [EN/DIS] FTP protocol
HTTP [EN/DIS] HTTP protocol
KEepalive n Keepalive interval (min)
LPD [EN/DIS] LPD protocol
MEthod <type> Set method of getting IP address
PIng aa.bb.cc.dd Test connection to IP host
PRObe [EN/DIS] TCP connection probes
RANge [EN/DIS/ALL] aa.bb.cc.dd {MAx ee.ff.gg.hh}
RARp flags nn 1=no subnet, 2=no router, 3=neither
REtry [EN/DIS] LPD retry continuation
ROuter aa.bb.cc.dd Default router address
SUbnet aa.bb.cc.dd Subnet mask
TCP [EN/DIS] Raw TCP (9100) protocol
TELnet [EN/DIS] TELNET protocol
TFTP [EN/DIS] TFTP protocol
TImeout n Inactivity timeout (minutes)
TRAP n [ADDR/PORT/TRIG] TRAP configuration
WIndow nn LPD/TCP maximum window size
Displays a list of the available help commands for “Set IP.”