Avery Dennison 9400 Series Programmer Manual - Manual (Page 36)

•
batch data when printing.
To send the Function Codes, use a tilde
(~) followed by a three digit ASCII code as
shown in the following table.
For example, to print a string of bar code
data with function code F2 as the fourth
character...
123(F2)5678
send this string of characters...
123~1295678
Two additional bar codes are supported as extensions to both
UPC and EAN bar codes.
+2 Send exactly two digits for this bar code.
+5 Send exactly six digits (a five-digit bar code and a
one-digit check digit).
ASCII Code Function
Code
~134
~129
~128
~132 F1
F2
F3
F4
9400 Series Programmer’s Manual
4-20