Beisler 100-58 - Manual (Page 15)

1-13
Reset spool thread length; when removing a half-full and
inserting a full spool, you can display the whole thread length by
pressing this key
4.1.1.7 Arrow and Enter-keys
Use the arrow keys to move the flashing cursor between the different
sections of a display. Confirm inputs using the Enter key.
4.1.2 Insertion station
The parts to be manufactured are inserted at the insertion station. Use the
marking lamps to align the parts exactly.
4.1.3 Mains / emergency stop button
With the mains / emergency stop button, you can cut-off the power supply of
the machine.
4.1.4 Foot pedal machine sequence
Use this foot pedal to trigger the steps of the machine sequence (see further
below).
4.1.5 Foot pedal vacuum
Press this foot pedal to enable the vacuum. The parts inserted at the
insertion station are fixed by the vacuum which will be disabled automatically,
after the main clamp has picked up the parts.
4.1.6 Foot pedal stacker
Press the foot pedal stacker to open the stacker to be able to take out the
stacked parts.