Beisler 100-58 User Manual
Page 31
2-11
32
Vacuum mode (option)
00:
vacuum disabled
01:
vacuum on with foot pedal vacuum (with display ‘enable
vacuum’ if not enabled with foot pedal)
02:
vacuum on automatically if main clamp at insertion position
03:
vacuum on with foot pedal advance
33
Main clamp mode
00:
main clamp left/right down and tight
01:
main clamp left down and tigh
02:
main clamp right down and tight
03:
main clamp both weak, before insertion both tight
35
Stacker mode
01:
only final roller
02:
only folding stacker
03:
folding stacker and final roller
36
Push-back locking off
00:
Push-back locking enabled
01:
Push-back locking disabled
37
Folder as stamp [00] (00 - 01)
00:
normal insertion process enabled
01:
with the first step on the foot pedal, the folder is lowered and
fixes the work piece; next step drives main clamp to insertion position;
after clamp is closed, the folder is pushed up to allow the insertion of
the vylene; only required for trouser production with pocket automaton
100/58 without stamp
38
Flap clam mode
00:
flap clamp active with foot pedal
01:
flap clamp automatically active
39
Breast welt mode
the breast welt will swing in together with the flap station
00:
folder down after flap clamp closed
01:
folder down when left flap clamp closed
3.3.1
Seam parameter 30: Flap clamp mode
In the control, you can switch on/off the left or right flap clamp and select one
of eight modes additionally; dependant on the selection, the flap clamp
behave different. In the following table, the mode number is shown in the first
column, the behaviour of the flap clamps is indicated with graphics.
left clamp closed
right clamp closed
left clamp open
right clamp open
Left and right flap clamp switched on:
00:
Insertion position
01:
like 00
02:
like 00
03:
like 00
04:
Insertion position
automatic with folding slide
05:
like 04
06:
like 04
07:
like 04