Beisler 1500-70-2 - Manual (Page 15)

1-13
5 Components of the machine
The machine contains several components, which are arranged according to
their function:
1. Racks for liner tape and thread spools.
2. Tape pulling device (option) beneath the liner tape rack.
3. Operation device above the working table.
4. Sewing head with metering, cutting device and pinking mechanism
(option).
5. Main switch to switch the machine on and off.
6. Collecting basket for threads and cutted cloth.
7. Foot pedal to start the program sequence.
5.1 Racks for liner tape and thread spools
The machine is equipped with several racks for liner tape rolls and thread
spools. A fast change between different colours and qualities is achieved by
that.
Thread spools are plugged on the holding devices, the liner tape racks are
equipped with additional roll holding devices, which can be pushed on and
pulled off.
5.2 Tape pulling device (option)
1
2
3
4
5
6
7
8
With the tape pulling device (option), an absolutely tension-free insertion of
the liner tape into the machine is achieved.
The liner tape (1) comes around the roll (2) and is driven between pressure
roll (3) and pull roll (4). Then it comes around another roll (5), passes the
frame (7) of the pull switch and around a last roll (6) out of the metering.
If liner tape is inserted into the sewing head by the metering, the frame (7) of
the pull switch is pressed upwards and switches a contact. The pull roll (4)
starts turning and transports liner tape, until the pull switch is switched off
again.
You can set the duration at the control (8), how long the pull roll (4) shall
continue turning after the pull switch had been switched off.