Beisler 1500-70-2 - Manual (Page 20)

1-18
6.3 Program control
Hint
This machine is controlled with programs, which are contained in the memory
of the machine and can be opened by the operator. The modification of
existing and the programming of new sewing programs should be reserved to
experienced and qualified personell. The possibilities are explained in the
second part of this manual.
6.3.1 Available sewing programs
In the daily production, the operator will only have to open one of the existing
sewing programs. The following programs are available as a factory setting:
6.3.1.1 Machines without pinking mechanism
Prog. Description
001 Program for the sewing of the liner tape without pinking the hem
edge
parts and threads are blown out after seam end.
002 Program for threading up the liner tape
press forward the foot pedal after inserting the liner tape into the
metering; the tape will be threaded up and cut; then the metering
will be swung in; press the foot pedal forward shortly, the liner tape
will be pushed forward to the needles.
6.3.1.2 Machines with pinking mechanism
Prog. Description
001 Program for sewing the liner tape with pinking the hem edge
the pinking is done with low pinking pressure; parts and threads will
be blown out after seam end.
002 Program for threading up the liner tape
press forward the foot pedal after inserting the liner tape into the
metering; the tape will be threaded up and cut; then the metering
will be swung in; press the foot pedal forward shortly, the liner tape
will be pushed forward to the needles.
003 Program for sewing the liner tape with pinking the hem edge for
difficult cloths
the pinking is done with high pinking pressure; parts and threads
will be blown out after seam end.
004 Program for sewing the liner tape without pinking the hem edge
parts and threads will be blown out after seam end.
The currently selected program is imaged in the upper left corner of the
display.
6.3.2 Select another sewing program
1. Move the cursor to the program number.
2. Press the Plus/Minus key repeatedly, until the desired program number is
displayed.