Beisler 1500-70-2 - Manual (Page 41)

2-17
if this icon is contained in a step, the step will be switched
on by pressing the foot pedal forward; after a program-
med time expired or a stitch counting, it will be switched
to the next step automatically.
Automatic execution
this step will be executed automatically.
Fn
Enabled outputs
one or several outputs are enabled in this step; position
the cursor on this icon and press the Special key, to
display the enabled outputs; crossed out icons represent
disabled outputs.
STOP
Stop
the program will be stopped after the execution of this
step; usually this icon is used in the last step of a sewing
program.
STOP
No stop
there will be no program stop but a continuation with the
next step.
Sewing foot up – down
indicates the position of the sewing foot at program start
and end.
Sewing foot position after thread cutting.
Thread cutter
this icon indicates that a thread cutting impulse will be
triggered at the end of the step and the thread will be cut.
Needle position after sewing stop
position the cursor on this icon and press the Plus key to
select, whether the needle shall stand in top or bottom
position after the stop.