BSS Audio MSR-602/604II Owner's Manual - Manual (Page 31)

29
Figure 15 indicates the location and specification for the suppressors.
In some situations it might be necessary to provide a transformer
balanced input and provision has been made within the MSR-604 II for
it’s mounting.
Please order as ‘MSR-604 II input transformer kit Z-MSRTXIII-01’. This is
per channel, with four required for one MSR-604 II unit. Full fitting
instructions are provided with this kit.
Provision has been made within the MSR-604 II to fit 600 ohm trans-
formers to the ‘main’ and ‘mon’ outputs to provide floating and isolated
outputs.
7.0 Appendix B
7.1 Input
Transformer
Balancing
7.2 Output
Transformer
Balancing
Appendix B
Input Transformer Balancing
Output Transformer Balancing