BSS Audio MSR-602/604II Owner's Manual - Manual (Page 33)

31
Stereo/Mono 1/4in Jack socket
Load Impedance 4 Ω to 600Ω
Max output 1W rms
Level control -90dB to 0dB
Power +/-27VDC, +48VDC from MSR-602 II PSU only
Connectors
9 pin ‘D’, with lock jackscrews
Weight 3.8kg Net
Size 1.75" x 19" x 11.6" (44 x 482 x 293 mm)
excluding connectors
AC Input 90-130/180-260VAC 50/60Hz @ 150VAC
Connector
3 pin IEC with locking clip
Voltage selector Rear panel 120/240V
Switch
Rear panel High-inrush
Fuse Rear panel T3.15AL250V (120V) / T2AL250V(240V)
DC Outputs +27V unregulated @ 3A max: low ripple
-27V unregulated @ 3A max: low ripple
+48V +/-5% regulated @ 300mA max
Rear panel Fuses F3AL250V(+27V)
F3AL250V(-27V)
F300MAL250V(+48V)
Connectors 9 pin ‘D’ female Loop out
9 pin ‘D’ male Loop return
System Ground Lift Rear panel Slide switch
Indicators 3 LEDs, post fuse, on +27V, -27V and +48V outputs
Headroom Meter
Via Listen bus and MSR-604 II Listen switch
(momentary)
Six point LED meter 0, -1, -3, -6, -12, -26dB ref clip
Input via DC Loop out connector
Headphone Monitor
Via Listen bus and MSR-604 II Listen switch
(momentary)
Input: via DC Loop out connector
Connector Stereo/Mono 1/4 Jack socket
Load impedance 4 Ω to 600Ω
Max output 4 Ω:860mWrms 200Ω:750mW rms
Level control Continuously variable -90dB to 0dB
Headroom >MSR-604 II channel clip
Technical Specifications
MSR-602 II
In keeping with our policy of continued improvement, BSS Audio
reserve the right to alter specifications without prior notice.