BSS Audio MSR-602/604II Owner's Manual - Manual (Page 4)

2
MSR-600 II Series
For continued compliance ensure that all input and output cables are
wired with cable screen connected to pin 1 of the XLR. The input XLR pin
1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good emc compatibility.
Welcome to the MSR-602/ 604 II Users Manual
Welcome
This manual is provided to assist sound engineers, installers and
consultants to fully understand the MSR-604 II and to benefit from its
full capability.
As opposed to most manuals, the contents can be read like a book.
At the same time, the information is structured under a series of broad
headings for easy access. So where possible within each section:
· The most immediate information appears at the head of each section
under the main title.
· As you read further into each subsequent section, more detailed,
specific information is given.
Should you have any comments or questions about applying the
MSR-604 II within your application, please write to us at the address in
the warranty section.
V1.5 9 August 2006
This Manual is the COPYRIGHT of BSS Audio. All reproduction and copying, other than for the legal
owner's personal use, or disclosure of part or whole to a third party, without prior written authorisa-
tion, is in violation of the European Copyright Convention. BSS Audio 1996