Vertical SBX IP 320 - Manual (Page 107)

Using Features and Functions 4 - 11
Chapter 4: Using a Single Line Telephone (SLT)
SBX IP 320 Phone User Guide
When Entering an OFF-NET Destination:
• Enter a telephone number and include access and area codes where
applicable.
• Enter a station (000 to 099) or system (2000 to 2499) speed bin
number.
Selecting a Forward Type
After you access the Call Forward Option (see steps 1 through 3 in “Overview
of Call Forwarding Calls” on page 4-10):
0 = FOLLOW-ME FORWARD
From any phone in the system, you can specify an extension to which you want
your calls forwarded. Once you enter the destination number, you will be
prompted for your password.
1. Press 0 for Follow-me Forward.
Example: You go to work in a lab room and want all calls forwarded to
that room, but have forgotten to set the forward prior to
leaving your office. You can pick up the phone in the lab and
set it for the Follow-me forward. All calls to your office phone
will then ring in the lab (until you cancel the setting).
2. Press 0 for FOLLOW-ME FORWARD, then enter the (your) station
number from which calls are to be forwarded.
3. Dial the authorization code of the forwarded extension.
Note: The authorization code must be registered before "Follow-Me"
Call Forward can be set. Contact your System Administrator
for details.
4. Dial the extension number to which you want calls forwarded.
1 = UNCONDITIONAL FORWARD
Have your calls forwarded any time your phone is not answered or busy.
Press 1 for UNCONDITIONAL FORWARD, enter the destination
extension, then your password.
2 = BUSY FORWARD
Have your calls forwarded to another destination when your phone is busy
(that is, when you are on another call).
Press 2 for BUSY FORWARD, then enter the destination extension.
(continued on next page)