Vertical SBX IP 320 - Manual (Page 41)

Customizing Your Phone 2 - 25
Chapter 2: Using the 24-Button Digital Phone
SBX IP 320 Phone User Guide
Setting the HTP Mode
You can set your phone to handle incoming calls in any of the various ways:
• Handsfree Mode- You will hear three bursts of tone and an
announcement. Reply handsfree (using the mic and speaker) or lift
handset. The calling party can hear any conversation in progress.
• Tone Mode (default)- You will hear repeated bursts of intercom ring tone
and the HOLD button slow flashes. Lift the handset or press SPEAKER
button to answer.
• Private - You will hear three bursts of tone and a one-way announcement.
The calling party cannot hear any conversation in progress until you lift the
handset or press Speaker to accept the call.
1. Use on the Nav Button to
access the Programming
Menu.
2. Press the OK soft button to
select the
BASIC PROGRAM
option.
3. Use on the Nav
button to scroll through the
options.
When you see the MODE H/T/P PROGRAM option:
4. Make sure the
MODE (H/T/P) PROGRAM
option is selected.
5. Press the OK soft button to
select the option.
6. Press the
NEXT
soft button to
scroll through the various
HTP Mode options.
(continued on next page)
1. BASIC PROGRAM
2. ADVANCED PROGRAM
OK
3. MODE(H/T/P) PROGRAM
4. PASSWORD PROGRAM
BACK
OK
TONE MODE
SELECT BY [NEXT ]
BACK
NEXT OK