Vertical SBX IP 320 - Manual (Page 76)

2 - 60 Using Phone Features and Functions
Chapter 2: Using the 24-Button Digital Phone
SBX IP 320 Phone User Guide
User Programming
There are several additional items which can be programmed for your specific
station. Some items can be programmed using the procedure below as well as
using page 2-19. However, certain features must be programmed using only
the menus below.
Hint: Review the Menu map shown in Appendix A for the location
of each feature and its options.
To Access and Navigate In User Programming
From your idle station:
1. Press TRANS/PGM to
display the first screen in
User Programming.
2. Use the VOLUME down
and up buttons to scroll
through the various
options in the menus.
Hint: Review the Menu
map in Appendix
A to find out which
menu item to
select on each
screen.
When you see an item/feature that you want to program:
3. Press the number that corresponds to the number next to the feature
name.
Example: To set Ring Type on your phone, press 1.
Repeat steps 2 and 3 to complete the settings you want to make.
Note: Contact your System Administrator if you have any questions
regarding the programming of your station.
STATION 100 ( T )
DEC 03 08 02:04 pm
[1] RING
[2] COS / SMS SER VICE
[3] AUTH / MOBILE-EXT
[4] TIME / CONF-ROOM
[5] MESSAGE
[6] ANNOUNCEMENT
[7] SUPPLEMENTARY
[*] SYSTEM