Vertical SBX IP 320 - Manual (Page 77)

Using Phone Features and Functions 2 - 61
Chapter 2: Using the 24-Button Digital Phone
SBX IP 320 Phone User Guide
Voice Over
This feature allows you, while on a current call, to simultaneously accept an
"announcement" from a station that has camped-on to your extension
(see“Camp-On” on page 2-38). You can converse with the camped on station
without your distant party hearing. You can also toggle between the camped
on station and your caller. However, the camped on user and your caller
cannot speak to each other.
Example: You have asked a co-worker to find some information that you
need to provide to a current caller. Once your co-worker has
found the information he can camp on to your busy station.
At that point, you can accept the Voice Over and speak to your
co-worker without your caller hearing. You can then switch back
and forth between your co-worker and your caller to gather and
deliver information.
To Accept a Voice Over Call
While on a call, you hear the
Camp-On tone, and see the
Camp-On notification on your
display:
1. Press HOLD/SAVE to put your
current caller on hold and
speak to the camped-on
user.
2. Press HOLD/SAVE again to put
the camped on user on hold
and reconnect to your original caller.
Hint: You can use Hold/Save to toggle back and forth between
these two calls.
CAMP-ON BY STA 105
05 FEB 08
09:51
TRANS CONF MUTE-->
VOICE OVER STA 101
05 FEB 08
09:51
TRANS CONF MUTE-->