Using phone features and functions, Call wait (camp-on), Flexible button programming – Vertical SBX IP 320 User Manual
Page 92: Mailbox buttons, Using phone features and functions -10
3
-
10
Using Phone Features and Functions
Chapter 3: Using the 8-Button Digital Phone
SBX IP 320 Phone User Guide
Using Phone Features and Functions
Call Wait (Camp-On)
Camp-On allows you to set your phone to automatically call back a station that
is busy.
After receiving station busy tone:
1. Press 6.
- A Camp-on tone sounds.
When the other extension becomes "un-busy", your phone will ring:
2. Pick up the handset, or press
SPEAKER
.
- You will hear the other extension ringing and can continue the call.
Flexible Button Programming
Use the procedure and Numbering Plan code shown in the section
“Programming Flex Buttons” on page 2-30.
Mailbox Buttons
In the idle state on any digital or IP phone (including Soft Phone), all
pre-programmed flex buttons assigned as mailbox buttons will flash red when
there is an un-played (new) message in the assigned mailbox.
Note:
See “Checking Voice Mailbox from Outside the Office” on page 2-64
for more information about Mailbox Buttons and Voice Mail.