Vertical SBX IP 320 - Manual (Page 94)

3 - 12 Using Phone Features and Functions
Chapter 3: Using the 8-Button Digital Phone
SBX IP 320 Phone User Guide
Speed Dial Numbers
Speed Dials can be programmed to dial directly to another person’s phone
number (for external calls) or extension (for internal calls. Your System
Administrator may have speed dial numbers programmed for use by anyone
in the system (known as System Speed Dial Numbers). However, you may
also be able to set up your own list of speed dial numbers for your own use
(known as Station Speed Dial Numbers).
Note: Speed Dial Numbers are also known as Speed Bins, and may be
designated as follows:
• Station Speed Bins: 000 to 099
• System Speed Bins: 2000 to 2499
Using Speed Dial Numbers
From an idle phone:
1. Press
SPEED
.
2. Enter the speed dial bin number assigned to the destination you want to
call.
- Your call will be dialed.
Programming Station Speed Dial Numbers/Bins
While your System Administrator can program System Speed Dial
Numbers/Bins (those that anyone in the system can use), you can create your
own list of speed dial numbers. These are known as Station Speed Dial
Numbers or Bins.
From an idle phone:
1. Press the
TRANS/PGM
, then
SPEED
.
2. Enter the appropriate speed bin number (range = 000-099).
3. Enter number you wish to associate with this Speed Dial Number (that is
the destination phone number).
4. Press
HOLD/SAVE
to store the number.
5. Enter the name associated to the number (see “Entering Characters for
Display Entries” on page 2-20)
6. Press
HOLD/SAVE
to store the name with the destination number.
- A confirmation tone will sound.