Vertical SBX IP 320 - Manual (Page 95)

Using Phone Features and Functions 3 - 13
Chapter 3: Using the 8-Button Digital Phone
SBX IP 320 Phone User Guide
User Programming
There are several items which can be programmed for your specific station.
Review the Menu map shown in Appendix A for the location of each feature
and its options.
To Access and Navigate In User Programming
From your idle station:
1. Press
TRANS/PGM
to
display the first screen in
User Programming.
2. Use the
VOLUME
down
and up buttons to scroll
through the various
options in the menus.
Hint: Review the Menu
Map in Appendix
A to find out which
menu item to
select on each
screen.
When you see an item/feature that you want to program:
3. Press the number that corresponds to the number next
to the feature name.
Example: To set Ring Type on your phone, press 1.
Repeat steps 2 and 3 to complete the settings you want to make.
Note: Contact your System Administrator if you have any questions
regarding the programming of your station.
STATION 100 ( T )
DEC 03 08
02:04 pm
[1] RING
[2] COS / SMS SER VICE
[3] AUTH / MOBILE-EXT
[4] TIME / CONF-ROOM
[5] MESSAGE
[6] ANNOUNCEMENT
[7] SUPPLEMENTARY
[*] SYSTEM