Cloud Electronics CX462 - Manual (Page 21)

CX462 Audio System Controller Setup And Installation Guide
CLOUD ELECTRONICS LIMITED
15 V3 280904
12.4 Microphone access switches not working
correctly
The CX462 leaves the factory configured to bypass the microphone access contacts for all
four microphone inputs, so that when the product arrives, all inputs will be enabled. Internal
jumpers J1 to J4 bypass access contacts for microphones 1 to 4 respectively. To enable
access switching on one of the microphone channels, disconnect the corresponding jumper.
NOTE: We advise that when you remove a jumper you leave it connected to one pin of the
header so it remains with the apparatus for future use.