Comtech EF Data RCS11 - Manual (Page 69)

RCS11 1:1 Redundancy Switch Connector Pinouts
MN-RCS11 – Revision 9 5–11
20 D3 - Output
21 D2 - Output
22 D1 - Output
23 D0 - Output
24 DVALID - Output
25 PSYNC - Output
5.7.1.1 Data A & Data B M2P Parallel Interface (J7 & J11)
The Data A and Data B M2P Parallel Interface (J7 & J11) is a 25-Pin Female ‘D’ port. This
interface connects to (A) or (B) Modulator or Demodulator. Refer to Table 5-13 for pinouts.
Table 5-13. J7 Data A (M2P Parallel) (25-Pin Female 'D')
Pin No. Description Signal
1 OUTCLK + Input
14 OUTCLK - Input
2 CLK + Output
15 CLK - Output
3 SYNC + Output
16 SYNC - Output
4 VALID + Output
17 VALID - Output
5 D0 + Output
18 D0 - Output
6 D1 + Output
19 D1 - Output
7 D2 + Output
20 D2 - Output
8 D3 + Output
21 D3 - Output
9 D4 + Output
22 D4 - Output
10 D5 + Output
23 D5 - Output
11 D6 + Output
24 D6 - Output
12 D7 + Output
25 D7 - Output
13 NC NA