Comtech EF Data SDM-2020 - Manual (Page 108)

SDM-2020 Satellite Demodulator Revision 4
Front Panel Operation MN/SDM2020D.IOM
6–44
IMPORTANT
Jumper setting dependent.
Displays the current RX LVDS or TX LVDS
Upon entry, the current status is displayed. Press [ ↑] or [↓] to change the
selection. Press <ENTER> to execute the change.
6.1.9.7 Function Select: Utility: Interface: ECL_HSSI RX
INTERFACE TYPE
ECL_HSSI RX
Press <ENTER> to review or edit the following sub-menus.
Function Select: Utility: Interface: ECL_HSSI RX: DTE Status
DTE STATUS
UNAVAILABLE
Displays the current status as UNAVAILABLE or AVAILABLE.
Upon entry, the current status is displayed. Press [ ↑] or [↓] to change the
selection. Press <ENTER> to execute the change.
6.1.9.8 Function Select: Utility: Interface: G.703
INTERFACE TYPE
G.703