Opening screen, Function select: configuration, 5 opening screen – Comtech EF Data SDM-2020 User Manual
Page 71: 1 function select: configuration
SDM-2020 Satellite Demodulator
Revision 4
Front Panel Operation
MN/SDM2020D.IOM
6–7
6.1.5 Opening
Screen
This screen is displayed whenever power is first applied to the unit.
SDM 2020 DEMOD
VER: X.X.X
Press any key to go to the Function Select: Configuration screen.
6.1.5.1 Function
Select: Configuration
FUNCTION SELECT
CONFIGURATION
Press [
→} key to go to any of the following sub-menus. Press <ENTER> to review or
edit the menu.
Configuration: Demodulator
Permits the user to configure the demodulator.
Configuration: Interface
Permits the user to configure the interface portion of the
demodulator.
Configuration: Save
Permits the user to save the configuration of the demodulator.
Configuration: Recall
Permits the user to configure the demodulator with a previously
saved configuration.
IMPORTANT
At any time, Press CLEAR to return to the previous screen.