Comtech EF Data SNM-1002 - Manual (Page 49)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–9
3.4.1.1.5 MODULATOR:SCRAMBLER
SCRAMBLER
ON
Displays the scrambler status, either On or Off.
Upon entry, the current scrambler is displayed with the flashing cursor on the first
character. Press [
↑ ] or [↓ ] to change the carrier mode. Press <ENTER> to execute the
change
3.4.1.1.6 MODULATOR:DIFF. ENCODER
DIFF. ENCODER
ON
Displays the differential encoder status, either On or Off.
Upon entry, the current differential decoder is displayed with the flashing cursor on the
first character. Press [
↑ ] or [↓ ] to change the carrier mode. Press <ENTER> to execute
the change.