Comtech EF Data SNM-1002 - Manual (Page 52)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–12
3.4.1.2.3 DEMODULATOR:DESCRAMBLER
DESCRAMBLER
ON
Displays the descrambler status, either On or Off.
Upon entry, the current descrambler is displayed. Press [
↑ ] or [↓ ] change the assigned
filter. Press <ENTER> to execute the change.
3.4.1.2.4 DEMODULATOR:DIFF.DECODER
DIFF. DECODER
ON
Displays the differential decoder status, either On or Off.
Upon entry, the current differential decoder is displayed. Press [
↑ ] or [↓ ] change the
assigned filter. Press <ENTER> to execute the change.
3.4.1.2.5 DEMODULATOR:RF LOOP BACK
RF LOOP BACK
OFF
Displays the RF loop back status, either On or Off.
Upon entry, the current RF loop back is displayed. Press [
↑ ] or [↓ ]. Press <ENTER> to
execute the change.