Comtech EF Data SNM-1002 - Manual (Page 84)

SNM-1002 LinkSync
 Modem
Revision 2
Operation MN/SNM1002.OM
3–44
3.4.5.4.3 SYSTEM:REMOTE ADDRESS
REMOTE ADDRESS
1
The current modem address is displayed (1 to 255).
Note: 0 is reserved as a global address.
To change the remote address, press [ENTER]. Press [
↑] or [↓] to make the selection. Press
[ENTER] to execute the change.
3.4.5.4.4 SYSTEM:REMOTE TYPE
REMOTE TYPE
RS-232
Select RS-485 (2-Wire), RS-485 (4-Wire), or RS-232.
3.4.5.4.5 SYSTEM:OPERATION MODE
OPERATION MODE
DUPLEX
Programs the modem for DUPLEX, TRANSMIT ONLY, or RECEIVE ONLY operation.
Upon entry, the operational status may be changed. Press [
↑] or [↓] to make the selection.
Press [ENTER] to execute the change.
Note: When TRANSMIT ONLY or RECEIVE ONLY are selected, the appropriate faults
are masked from the Faults and Stored Faults menus.